Preparation
Clean surface
with a degreaser or solvent to remove all
wax, oil, grease, and polish. Rinse with water
and let surface dry.
Application
Wipe thin coats
of Aluma Glow on with a clean, white, lint-free
cloth (do not use a colored cloth) or small
foam brush. No buffing is required. Aluma
Glow dries to the touch in 5-10 minutes. Two
coats recommended.
Additional
Information
Long
term protection (LASTS 3 - 5 YEARS) against
oxidation and pitting of anodized aluminum,
stainless steel, chrome, brass and bronze.
Easy to apply, wipe on or brush on, dries
in approximately 10 minutes. Self leveling.
Will not crack, chip, peel or yellow. Protects
against UV Rays, salt air, salt water and
corrosion.
RETURN
POLICY - If for any reason you are
not completely satisfied with your purchase,
simply return product for a full refund less
shipping and handling within 12 months.
